Wind turbine speed control of a contactless piezoelectric wind energy harvester

ABSTRACT

Wind turbine control is an important task to make the electricity generation secure in terms of energy demand and machine safety. It also yields to control the desired power level and optimized energy because of the assignment of turbine speed. The contactless piezoelectric wind energy harvester (CPWEH) used in this study has three piezoelectric layers located around the shaft with 120 degrees apart and they are buckled by the magnetic force without any physical contact. The superiority of this device is to generate energy for low wind speeds such as 1.5 m/s. However, for high speeds, high total harmonic distortions (THDs) govern the waveforms, thus controlling the turbine speed becomes necessary for optimizing the output power. Encouraged by this, a small low inertia dc generator is coupled with the wind turbine, and the generator terminals are connected to a resistor through a power switch to generate a braking torque that opposes to wind speed direction. By controlling the switch properly, turbine speed is ensured to remain within a certain band, which accordingly prevents the turbine from rotating very fast at damaging wind speeds. Several experiments are performed on the developed CPWEH with/without the presented control scheme which prove the existence of promising performance of our proposal.     

A comprehensive review of renewable energy resources for electricity generation in Australia

Recently, renewable energy resources and their impacts have sparked a heated debate to resolve the Australian energy crisis. There are many projects launched throughout the country to improve network security and reliability. This paper aims to review the current status of different renewable energy resources along with their impacts on society and the environment. Besides, it provides for the first time the statistics of the documents published in the field of renewable energy in Australia. The statistics include information such as the rate of papers published, possible journals for finding relative paper, types of documents published, top authors, and the most prevalent keywords in the field of renewable energy in Australia. It will focus on solar, wind, biomass, geothermal and hydropower technologies and will investigate the social and environmental impacts of these technologies.     

Measuring labor input on pasture-based dairy farms using a smartphone

With the cessation of milk quotas in the European Union, dairy herd sizes increased in some countries, including Ireland, with an associated increase in labor requirement. Second to feed costs, labor has been identified as one of the highest costs on pasture-based dairy farms. Compared with other European Union countries, Ireland has historically had low milk production per labor unit; thus, optimization of labor efficiency on farm should be addressed before or concurrently with herd expansion. The objective of this study was to quantify current levels of labor input and labor efficiency on commercial pasture-based dairy farms and to identify the facilities and management practices associated with increased labor efficiency. Thirty-eight dairy farms of varying herd sizes, previously identified as labor-efficient farms, were enrolled on the study and data were collected over 3 consecutive days each month over a 12-mo period, starting in May 2015 and finishing in August of 2016. This was achieved through the use of a smartphone application. For analysis purposes, farms were categorized into 1 of 3 herd size categories (HSC): farms with <150 cows (HSC 1), 150–249 cows (HSC 2), or ≥250 cows (HSC 3). Overall farm labor input increased with HSC with 3,015, 4,499, and 6,023 h worked on HSC 1, 2, and 3, respectively. A higher proportion of work was carried out by hired staff as herd size increased. Labor efficiency was measured as total hours input to the dairy enterprise divided by herd size. Labor efficiency improved as herd size increased above 250 cows with 17.3 h/cow per yr observed for HSC 3; labor efficiency was similar for HSC 1 and 2, at 23.8 and 23.3 h/cow per yr, respectively. A large range of efficiency was observed within HSC. The labor requirements had a distinct seasonal pattern across the 3 HSC with the highest input observed in springtime (February to April) primarily due to calving and calf-care duties, milking, and winter feeding. The lowest input was observed in wintertime (November to January) when cows were dry. Particular facilities and management practices were associated with efficiency within certain tasks, the most notable in regard to milking and winter feeding practices. Additionally, the most efficient farms used contractors to perform a higher proportion of machinery work on farm than the least efficient farms.     

考虑流固耦合的Spar型浮式风力机涡激运动特性研究

对弹性支撑单圆柱在均匀流作用下的涡激运动特性进行数值模拟,捕捉到"锁定区"、"拍"、"频率变换"等现象。柱体周围流场采用Fluent求解,将4阶Runge-Kutta方法代码写入用户自定义函数(UDF)求解运动微分方程,运用动网格技术更新流场,实现圆柱与流场的非线性耦合作用。发现随着折合速度的增大,涡激运动响应可分为锁定前支、锁定区、锁定后支3个阶段,在进入锁定区前(折合速度Ur=3)横向运动响应发生拍现象,当跨过锁定区后(折合速度Ur=10)发生频率变换现象。结果表明,横向涡激运动有较大范围的频率锁定现象,频率解锁前后圆柱涡激运动轨迹由"右8字"形变换为"左8字"形。     

Blockage effects in wind farms

An experimental study of wind farm blockage has been performed to quantify the velocity decrease that the first row of a wind farm experiences due to the presence of the other turbines downstream. The general perception has been that turbines downstream of the first row are only influenced by the wakes from upstream turbines without any upstream effect. In the present study, an attempt is made to demonstrate the existence of a two‐way coupling between individual turbines and turbines in the wind farm. Several staggered layouts were tested in the wind tunnel experiments by changing the spacing between rows, spacing between turbines in the rows, and the amount of wind turbines involved. The experiments focused on turbines located in the center of the first row as well as the two turbines located in the row edges, usually believed to experience a speedup. The present results show that no speedup is present and that all the turbines in the first row are subjected to a reduced wind speed. This phenomenon has been considered to be due to “global blockage.” An empirical correlation formula between spacing, number of rows, and velocity decrease is proposed to quantify such effect for the center turbine as well as for the turbines at the edges.     

垂直轴风力机两种翼型气动性能比较研究

叶片是风力机最重要的组成部分,在不同的风能资源情况下,翼型的选择对垂直轴风力机气动特性有着重要的影响。文章分别以NACA0018翼型(对称翼型)和NACA4418翼型(非对称翼型)建立3叶片H型垂直轴风力机二维仿真模型。应用数值模拟的研究方法,从功率系数、单个叶片切向力系数等方面比较两种风力机模型在不同叶尖速比下的气动特性,并采用风洞实验数据验证了流场计算的准确性。CFD计算结果表明:在低叶尖速比下,NACA4418翼型风力机气动特性优于NACA0018翼型风力机,适用于低风速区域;在高叶尖速比下,NACA0018翼型风力机气动特性较好,适用于高风速地区。而且在高叶尖速比时,NACA0018翼型在上风区时,切向力系数平均值要高于NACA4418翼型,在下风区时,NACA418翼型切向力系数平均值高。该研究可为小型垂直轴风力机翼型的选择提供参考。     

Optimal supplementary frequency controller design using the wind farm frequency model and controller parameters stability region

In most of the existing studies, the frequency response in the variable speed wind turbines (VSWTs) is simply realized by changing the torque set-point via appropriate inputs such as frequency deviations signal. However, effective dynamics and systematic process design have not been comprehensively discussed yet. Accordingly, this paper proposes a proportional-derivative frequency controller and investigates its performance in a wind farm consisting of several VSWTs. A band-pass filter is deployed before the proposed controller to avoid responding to either steady state frequency deviations or high rate of change of frequency. To design the controller, the frequency model of the wind farm is first characterized. The proposed controller is then designed based on the obtained open loop system. The stability region associated with the controller parameters is analytically determined by decomposing the closed-loop system's characteristic polynomial into the odd and even parts. The performance of the proposed controller is evaluated through extensive simulations in MATLAB/Simulink environment in a power system comprising a high penetration of VSWTs equipped with the proposed controller. Finally, based on the obtained feasible area and appropriate objective function, the optimal values associated with the controller parameters are determined using the genetic algorithm (GA).     

基于GA-BP的汽车风振噪声声品质预测模型

目前对于汽车风振噪声的优化研究主要以声压级（Sound pressure level，SPL）作为单一评价指标，既不能全面反映噪声的物理属性，也无法考虑人耳对噪声的主观认知过程。为准确评价风振噪声，引入声品质，运用大涡模拟（Large eddy simulation，LES）对风振噪声进行数值仿真，根据实车道路试验判断仿真的准确性；对仿真结果进行声品质客观评价与主观评价，综合声品质客观评价参数与声品质主观评价试验结果建立BP神经网络预测模型；利用遗传算法（Genetic algorithm，GA），进一步对BP神经网络的结构参数进行优化，建立GA-BP声品质预测模型。研究结果表明，GA-BP声品质预测模型在训练速度和预测精度上都优于BP神经网络预测模型。预测模型基于声品质主客观评价结果，其预测值可以代替传统的声压级评价指标，为风振噪声提供更为准确合理的评价。     

Experimental study on mitigating wind erosion of calcareous desert sand using spray method for microbially induced calcium carbonate precipitation

Wind erosion is one of the significant natural calamities worldwide, which degrades around one-third of global land. The eroded and suspended soil particles in the environment may cause health hazards, i.e. allergies and respiratory diseases, due to the presence of harmful contaminants, bacteria, and pollens. The present study evaluates the feasibility of microbially induced calcium carbonate precipitation (MICP) technique to mitigate wind-induced erosion of calcareous desert sand (Thar desert of Rajasthan province in India). The temperature during biotreatment was kept at 36 °C to stimulate the average temperature of the Thar desert. The spray method was used for bioaugmentation of Sporosarcina (S.) pasteurii and further treatment using chemical solutions. The chemical solution of 0.25 pore volume was sprayed continuously up to 5 d, 10 d, 15 d, and 20 d, using two different concentration ratios of urea and calcium chloride dihydrate viz 2:1 and 1:1. The biotreated samples were subjected to erosion testing (in the wind tunnel) at different wind speeds of 10 m/s, 20 m/s, and 30 m/s. The unconfined compressive strength of the biocemented crust was measured using a pocket penetrometer. The variation in calcite precipitation and microstructure (including the presence of crystalline minerals) of untreated as well as biotreated sand samples were determined through calcimeter, scanning electron microscope (SEM), and energy-dispersive X-ray spectroscope (EDX). The results demonstrated that the erosion of untreated sand increases with an increase in wind speeds. When compared to untreated sand, a lower erosion was observed in all biocemented sand samples, irrespective of treatment condition and wind speed. It was observed that the sample treated with 1:1 cementation solution for up to 5 d, was found to effectively resist erosion at a wind speed of 10 m/s. Moreover, a significant erosion resistance was ascertained in 15 d and 20 d treated samples at higher wind speeds. The calcite content percentage, thickness of crust, bulk density, and surface strength of biocemented sand were enhanced with the increase in treatment duration. The 1:1 concentration ratio of cementation solution was found effective in improving crust thickness and surface strength as compared to 2:1 concentration ratio of cementation solution. The calcite crystals formation was observed in SEM analysis and calcium peaks were observed in EDX analysis for biotreated sand.     

Resource potential for wind-hydrogen power in Ukraine

The paper provides an assessment of the current wind energy potential in Ukraine, and discusses developmental prospects for wind-hydrogen power generation in the country. Hydrogen utilization is a highly promising option for Ukraine's energy system, environment, and business. In Ukraine, an optimal way towards clean zero-carbon energy production is through the development of the wind-hydrogen sector. In order to make it possible, the energy potential of industrial hydrogen production and use has to be studied thoroughly.Ukraine possesses huge resources for wind energy supply. At the beginning of 2020, the total installed capacity of Ukrainian wind farms was 1.17 GW. Wind power generation in Ukraine has significant advantages in comparison to the use of traditional sources such as thermal and nuclear energy.In this work, an assessment of the wind resource potential in Ukraine is made via the geographical approach suggested by the authors, and according to the «Methodical guidelines for the assessment of average annual power generation by a wind turbine based on the long-term wind speed observation data». The paper analyses the long-term dynamics of average annual wind speed at 40 Ukrainian weather stations that provide valid data. The parameter for the vertical wind profile model is calculated based on the data reanalysis for 10 m and 50 m altitudes. The capacity factor (CF) for modern wind turbine generators is determined. The CF spatial distribution for an average 3 MW wind turbine and the power generation potential for the wind power plants across the territory of Ukraine are mapped.Based on the wind energy potential assessment, the equivalent possible production of water electrolysis-derived green hydrogen is estimated. The potential average annual production of green hydrogen across the territory of Ukraine is mapped.It is concluded that Ukraine can potentially establish wind power plants with a total capacity of 688 GW on its territory. The average annual electricity production of this system is supposed to reach up to 2174 bln kWh. Thus, it can provide an average annual production of 483 billion Nm³ (43 million tons) of green hydrogen by electrolysis. The social efficiency of investments in wind-hydrogen electricity is presented.